Garage Door Hinge

Need to replace a bent or broken garage door hinge?

Our store carries standard and decorative hinges.

On this page you will find our standard hinges. If you prefer, go to our Decorative Garage Door Hinge page.

14 Gauge Position #1 Hinge

Hinge #1 replaces hinge between 1st and 2nd sections on left & right side of door & all center positions.

• Heavy-Duty 14 Gauge Galvanized Steel. Width: 3" overall & Height: 7 3/8" high.
• Roller tube accepts a standard 7/16" outer diameter stem roller.
• This #1 Hinge is for use with residential sectional garage doors.
• Should have #1 printed on the existing hinge.
• Used by most garage door manufacturers.

14 Gauge Position #2 Hinge

For use with residential sectional garage doors. Hinge #2 replaces hinge between 2nd and 3rd sections on left & right side of door.

• Hinge #2 replaces hinge between 2nd and 3rd sections on left & right side of door
• Roller tube accepts a standard 7/16" outer diameter stem roller
• This #2 Hinge is for use with residential sectional garage doors
• Should have #2 printed on the existing hinge
• Width: 3" overall & Height: 7 3/8" high

14 Gauge Position #3 Hinge

Hinge #3 replaces hinge between 3rd and 4th sections on left & right side of door.

• Roller tube accepts a standard 7/16" outer diameter stem roller
• This #3 Hinge is for use with residential sectional garage doors
• Should have #3 printed on the existing hinge
• Width: 3" overall & Height: 7 3/8" high

14 Gauge Position #4 Hinge

Hinge #4 replaces hinge between 4th and 5th sections on left & right side of door.

• Width: 3" overall & Height: 7 3/8" high. Heavy-Duty 14 Gauge Galvanized Steel.
• Roller tube accepts a standard 7/16" outer diameter stem roller.
• This #4 Hinge is for use with residential sectional garage doors.
• Should have #4 printed on the existing hinge. Used by most garage door manufacturers.

14 Gauge Position #5 Hinge

Hinge #5 replaces hinge between 3rd and 4th sections on left & right side of door.

• Heavy-Duty 14 Gauge Galvanized Steel
• Roller tube accepts a standard 7/16" outer diameter stem roller
• This #5 Hinge is for use with residential sectional garage doors
• Width: 3" overall & Height: 7 3/8" high

18 Gauge Position #1 Hinge

Garage Door Hinge #1 replaces hinge between 1st and 2nd sections on left & right side of door & all center positions.

• 18 Gauge Galvanized Steel. Width: 3" overall & Height: 7 3/8" high.
• Roller tube accepts a standard 7/16" outer diameter stem roller.
• This #1 Hinge is for use with residential sectional garage doors.
• Should have #1 printed on the existing hinge.
• Used by most garage door manufacturers.

18 Gauge Position #2 Hinge

Hinge #2 replaces hinge between 2nd and 3rd sections on left & right side of door.

• Width: 3" overall & Height: 7 3/8" high. 18 Gauge Galvanized Steel.
• Roller tube accepts a standard 7/16" outer diameter stem roller.
• This #2 Hinge is for use with residential sectional garage doors.
• Should have #2 printed on the existing hinge. Used by most garage door manufacturers.

18 Gauge Position #3 Hinge

Hinge #3 replaces hinge between 3rd and 4th sections on left & right side of door.

• Width: 3" overall & Height: 7 3/8" high. 18 Gauge Galvanized Steel.
• Roller tube accepts a standard 7/16" outer diameter stem roller.
• This #3 Hinge is for use with residential sectional garage doors.
• Should have #3 printed on the existing hinge. Used by most garage door manufacturers.

18 Gauge Position #4 Hinge

Hinge #4 replaces hinge between 4th and 5th sections on left & right side of door.

• Width: 3" overall & Height: 7 3/8" high. 18 Gauge Galvanized Steel.
• Roller tube accepts a standard 7/16" outer diameter stem roller.
• This #4 Hinge is for use with residential sectional garage doors.
• Should have #4 printed on the existing hinge.
• Used by most garage door manufacturers.

Heavy Duty Garage Door Hinge, #2

• 1 hinge;
• 4 ea. 1/4"- 20 x 1-7/8" pancake head carriage bolts with nuts.

Heavy duty 14 gauge galvanized steel hinge;

roller tube accepts a standard 7/16" diameter stem roller;

used by most garage door manufacturers.

Orders of 10 or more for this item require Special Accommodations requiring additional days to ship and are not refundable.

National Mfg. N280214 No. 4 Hinge

Sectional overhead garage door hardware.

Heavy duty galvanized 14 gauge hinge.

Used by most garage door manufacturers.

Roller tube accepts a standard 7 16" diameter stem roller.

Contents: 1 hinge, 4 each 1/4" x 1 7/8" pancake head carriage bolts with nuts.

#4 HINGE W/BOLTS & NUTS

Garage Door Hinge

Heavy duty 14 gauge galvanized steel hinge;
rollertube accepts a standard 7/16" diameter stem roller;
used by most garage door manufacturers.

**Note, Orders of 10 or more for this item require Special Accommodations requiring additional days to ship and are not refundable.

• 1 hinge
• 4 ea. 1/4"- 20 x 1-7/8" pancake head carriage bolts with nuts.

Garage Door Hinge #1

Heavy duty 14 gauge galvanized steel hinge;
rollertube accepts a standard 7/16" diameter stem roller;
used by most garage door manufacturers.

Installation instructions enclosed.

**Note, Orders of 10 or more for this item require Special Accommodations requiring additional days to ship and are not refundable.

• 1 hinge
• 4 ea. 1/4"- 20 x 1-7/8" pancake head carriagebolts with nuts.

Hinge (GD52107)

Heavy duty 14 gauge galvanized steel hinge;
rollertube accepts a standard 7/16" diameter stem roller;
used by most garage door manufacturers.

**Note, Orders of 10 or more for this item require Special Accommodations requiring additional days to ship and are not refundable.

• 1 hinge
• 4 ea. 1/4"- 20 x 1-7/8" pancake head carriage bolts with nuts.

No. 1 Hinge

Heavy duty 14 gauge galvanized steel hinge.

**Note, Orders of 10 or more for this item require Special Accommodations requiring additional days to ship and are not refundable.

• 1 hinge
• 4 ea. 1/4"- 20 x 1-7/8" pancake head carriagebolts with nuts.
• For most garage door manufacturers

Sectional Garage Door Hinge, #1

For use on most overhead sectional wood and steel garage doors.

No. 1 hinge installs between all center garage door joints.

Low profile design allows for use in majority of retrofit applications.

Hinge barrel accepts 7/16" roller shaft.

Each hinge manufactured of 14 gauge steel, with carriage bolts and nuts.

• Heavy duty galvanized 14 gauge hinge
• Used by most garage door manufacturers
• Roller tube accepts a standard 7/16" diameter stem
• Includes: one hinge, four no. 20 1/4" X 1-7/8" bolts and nuts
• Hot dipped galvanized steel

Sectional Garage Door Hinge #3

For use on most overhead sectional wood and steel garage doors.

Low profile design allows for use in majority of retrofit applications.

Hinge barrel accepts 7/16" roller shaft.

Each hinge manufactured of 14 gauge steel, with carriage bolts and nuts.

Made by Stanley

Slide-Co Prime-Line GD52107 Hinge

• *For most garage door manufacturers
• Includes 1 hinge & 4 each 1/4"-20 x 1-7/8 pancake headcarriage bolts with nuts
• 14 gauge galvanized steel hinge
• Carded
• No. 4 position

Garage Door Opener Guide Store
Shop for Garage Door Parts Online

To Top of Page--->Garage Door Hinge

Back to --->Garage Door Opener Parts

Home Page--->Garage Door Opener Guide