Genie Keypad Entry Systems

Do you need a new or replacement Genie Keypad? When you are outside without your keys, simply enter your pin number and the garage door opens. Latch-key kids? - they don't have to carry keys, they just use your keypad.

Genie Garage Door Opener Replacement Keypad and Ribbon for KEP-1

Replacement keyboard for garage door opener universal wired keypad model KEP-1

Includes keyboard and wire harness connector (ribbon)

Original manufacturer garage door opener replacement part with full manufacturers warranty

TO REPROGRAM YOUR KEP-1:
Unplug the transformer for 2 minutes, this will reset the board and erase old code.
Place the set / run switch to SET (found inside main interface box)
Chose your pin number (1 to 8 numbers or letters). Do not use the * in your pin.
Enter chosen pin.
Press * button once to lock in pin number.
Move the set / run switch to RUN. Programming is complete.


Genie Wireless Keypad with Intellicode #GWKP

Wireless Keypad Garage Door Opener With Intellicode

Wireless & Keyless

Opens Garage Door.

Easy to program

For use with Intellicode openers maufactured after 1995

Note: The unit installs and works well, but it doesn't seem to be very durable. Average life under normal use seems to be about 1 to 3 years, then the cover falls off (see replacement covers at bottom of page).

5 to 10 minute easy installation, works great.


Genie Wireless Keypad #GWK-BL

This looks like my keypad, but how do I know if it's the right one?

1. Frequency: Check the back of your remote or keypad to make sure the frequency is 390mhz (megahertz).

2. Dip Switches: Open the battery compartment on your old garage door remote or keypad and look to see how many dip switches (tiny switches in a row) it has. If your old remote has 9 or 12 dip switches, then it's a match for this keypad.

If you don't have your old garage door remote, you can also look to see how many dip switches are on the back of your garage door opener (the overhead unit in your garage). The number of dip switches on the back of the opener is the same as on the remote or keypad.

Easy to program

For use with non-Intellicode openers manufactured between 1980-1995


Genie Garage Door Opener UNIVERSAL "Wired" Keypad & Receiver Set Model KEP-1

KEP-1 offers convenient, secure garage entry without using a remote controller or key.

Installs on ANY garage door opener, no matter what brand

  • Installs on ANY garage door opener, no matter what brand
  • Adds security and convenience - Easy installation
  • This is a universal keyless entry that will wire in to the push button terminals on any GDO
  • This keyless entry requires a transformer which is included to power the Keypad
  • Includes Keypad, Receiver, Wall Transformer, Wiring, Fasteners and Installation Instructions

GWKP/ACSD1G Garage Door Opener Keypad

This keypad will operate up to three (3) doors, 390 MHZ Frequency with code rotating Intellicode and Overhead Door Code-Dodger foramts.

Compatible with all Intellicode/Overhead Door CodeDodger Series II garage door openers.

Replaces GWKIC Intellicode Wireless Keypad

Very convenient to use without carrying a key.

  • INTELLICODE Keypad garage door opener wireless keypad
  • Keypad will operate up to three (3) doors, 390 MHZ Frequency with code rotating Intellicode format
  • The keypad model GWKIC offers secure garage entry without using a remote control or key
  • Compatible with all Intellicode Series II garage door openers maufactured after 1995
  • Low battery power indicator light.


Genie Garage Door GPWK-12 Wireless Keypad

Compatible with transmitter models: AT90, MAT90, CT90, LD12, AT95, AT290, LDT/GPT/GT90-1,2,3,4, model 912.

390 MHZ Frequency, works with 9 or 12 Dip switch Genie garage door openers.

Easy installation, just 2 screws!

Convenient in case you forget your remote control.

One year manufacturer warranty.

9V Battery included.


Genie GWKIC garage door opener keypad Intellicode opener

INTELLICODE Keypad garage door opener wireless keypad

This keypad will operate up to three (3) doors, 390 MHZ Frequency with code rotating Intellicode format

GWKIC offers secure garage entry without using a remote control or key

Compatible with all Intellicode Series II garage door openers

Compatibles: GIR-390, GIR390-1T, GIT-1 ACSCTG type 1, GIT-2 ACSCTG Type 2, GIT-3 ACSCTG Type 3, GMI-3BL intellicode keychain remote


KEP-1 Universal Keypad

Offers secure garage entry without using a remote control or key

Universal keyless entry for use on Genie,Intellicode,Sears,Stanley and most other openers.

This is a universal keyless entry that will wire in to the push button terminals on any GDO.

Includes Keypad, Receiver, Wall Transformer, Wiring, Fasteners and Installation Instructions

solid, simple design


Sandstone Cover for Genie GWKP/ACSD1G Wireless Keyless Entry System

Sandstone cover for Genie GWKP/ACSD1G Wireless Keypad

Also available in Almond and Brown


Brown Cover for Genie GWKP Wireless Keyless Entry System (35365R)

Brown cover for Genie GWKP/ACSD1G Wireless Keypad

Also available in Almond and Sandstone




Garage Door Opener Guide Store
Shop for Garage Door Parts and Accessories Online

To Top of Page--->Genie Keypad Entry Systems

Back to Genie Garage Door Openers

Garage Door Opener Guide Home Page