MultiCode Garage Door Opener

Multicode garage door opener, Multi Elmac and Multi-code remotes by the Linear corporation are among the most common remotes used today. Need a replacement remote control?

These remote transmitters listed are the Multi-Code garage door opener remotes manufactured by Linear and a few others. Match up the model number on the back of your Multi-Code remote control and find the corresponding model number below.

Multi-Code 3089 Remote Garage Door Transmitter

Multicode garage door opener model 3089 hand held remote control.

300 MHZ Frequency gate or garage door remote transmitter. Compatible with ALL U.S. Multicode gate or garage door opener systems.

Replaces Multicode model 1089 300MHz 10 Dip Switch Remotes.Multicode 3089 replaces Multi Elmac 3089.

10 Dip Switches, one (1) button. Visor clip, 9V battery and one year warranty included.

2 Linear 3089 Gate Opener or Garage Door Opener Remotes

The Model 308911 1-Channel Visor Transmitter is a poratble transmitter designed for automatic door and gate operator applications.

This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver.

The transmitter has a red test/operate indicator and is powered by a 9-volt battery.

The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code.

The Model 308911 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers. A visor clip is included.

* Compatible with U.S. Multicode gate or garage door openers by Linear

* Replaces Multicode model 1089 300MHz 10 Dip Switch Remotes

* 300 MHz -10 binary dipswitches

* Not a universal remote-only for Linear Multicode openers

* Includes: Visor Remote, Battery Installed, Directions, and Visor Clip

Multicode 4200 - Garage Door Keypad

The Model 420001 Wireless Keypad is a weather-resistant keyless entry station transmitter.

Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator.

The transmitter is powered by a 9-volt battery, has a test/operate indicator, and keys that light during use. When the battery gets low, the keypad will blink during use to indicate that the battery needs changing.

The transmitter is Multi-Code format providing 1,024 possible radio codes. The transmitter will only activate receivers set with the same code programmed into the keypad.

The Model 420001 is compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers.

10 Dip Switches, single channel, will operate one device

Multicode 4120 - 300 MHz 2 Button Remote Control

Multicode 4120 garage door opener 2 button hand held remote control. 300 MHz Frequency gate or garage door opener remote transmitter.

Two (2) sets of 10 Dip Switches with two (2) buttons, this item will operate up to two (2) gate or garage doors equipped with the Multicode system.

Visor clip, 9V battery and one year warranty included.

Compatible with all US Multicode gate or garage door opener systems.

Compatible remotes: Carper 300, Multicode 1090, Multicode 3060, Multicode 3070, Multicode 3083, Multicode 3089, Multicode 4140, Multicode 4200, and Skylink 100.

Linear MCS307010 1-Channel Key Ring Remote

Micro slim line 1-button, 1-channel key ring transmitter.

12-volt battery powered, test/operate LED, 1024 selectable codes.

* One Button
* Binary Dip Switch Coding
* 10 Dip Switches
* Key Chain

Keychain Remote Garage Door Opener Firefly 300Mhz

Compatible with Multi-Code receivers and transmitters.

10 Dip switch style remote operates on 300mhz frequency.

Keychain remote one button with 12 volt battery included.

Remote, keyring, & Battery included.

10 dip switch 300mhz multicode compatible.

Multicode 3083 - Mini 2 Button Garage Door Opener

Multicode 3083 2-button mini key chain sized remote control.

300 MHz Frequency gate or garage door opener remote transmitter. Compatible with all Multicode 10 Dip Switch systems.

Two (2) sets of 10 Dip Switches with two (2) buttons, this item will operate up to two (2) gate or garage doors equipped with the Multicode system.

Mini key chain size (2.5 by 1.5) convenient for purse or motorcycle.

Velcro strip and 12V battery included with full manufacturer warranty.

Compatible remotes: Carper 300, Multicode 1090, Multicode 306,0 Multicode 3070, Multicode 3089, Multicode 4120, Multicode 4140, and Multicode 4200

Multicode - Visor Clip for 3089, 4120 and 4140 Garage Door or Gate Openers

Multicode 3089, 4120 and 4140 visor clip.

Multicode 3070 - Mini Garage Door Opener

Multicode 3070 micro-mini key chain sized remote control. 300 MHz Frequency. Gate or garage door opener remote transmitter. >Compatible with all Multicode 10 Dip Switch systems. Mini key chain size (2.5 by 1.25) convenient for purse or motorcycle.

Velcro strip and 12V battery included with full manufacturer warranty.

300 MHz Frequency, 10 Dip Switches for coding.

Compatible remotes: Carper 300, Multicode 1090, Multicode 3060, Multicode 3083, Multicode 3089, Multicode 4120, Multicode 4140, Multicode 4200, and Skylink 100.

Multicode 4140 - Remote Garage Door Opener Transmitter

Visor size 4 button remote control.

Compatible with all Multicode brand systems.

300 MHz frequency.

2 sets of 10 (binary) dip switches.

Visor clip, 9V battery and one year warranty included

Liftmaster Chamberlain® 300MC Linear-Compatible Gate and Garage Door Opener Remote

Compatible Replacement these Multicode remote control models: Linear, 3089, 1089, 3060. Digi-Code, DC5010, DC5040. Use with these Multicode 300Mhz Receivers: Linear, 1090, 1099, 3021 & 3028. Tricode, TCG1, TCG2, TCr1, TCr2

* Test / Operate LED. Neutral Case Color.
* Visor Clip. Easy Access to 12v battery and DIP Switch.
* Meets FCC Part 15 Requirements. Power: 12v Battery (included).
* Frequency: 300Mhz
* Codes: 1,024 (Set by DIP Switches).
* Dimensions: 3.75'' X 1.5'' X 0.75''

Stinger 300MCD21V Garage Door Opener Visor Remote Linear Multicode 3089 Compatible

ONLY Operates with Linear Multi-Code receivers and transmitters on 300mhz with 10 dip switches.

(This is not for Genie, Liftmaster, Sears, Raynor, Wayne Dalton, motor head will say Linear) Test/operate LED.

Gray case
Frequency: 300 MHz.
Visor clip and 12 V battery included.
To Program: match dip switches in remote to switches in your Linear Opener

MultiLink SD - 300M - Multicode Compatible Mini Keychain Garage Door Opener Remote

10 Dip switch.

300 MHz

works with all multicode garage door opener remotes

Has a flashlight built in.

Multicode 1090-3089 - 300MHz 1 Receiver with 1 Remote

Upgrade your old garage door opener receiver and transmitter with this Multicode set.

Installs on ANY automatic gate or garage door opener.

This receiver and transmitter set will also install on access gates as well.

Multicode 12/24V Gate or Garage Door Opener Receiver Model 1099-50 w/coax antenna (300/310 MHz)

10 Dip Switches, single channel, will operate one device.

Works with Multicode 300 MHz remotes or Stanley 310 MHz remotes, but not both at the same time. 300 or 310 MHz jumper-selectable frequency adjustment.

4 36" 22AWG wires on removable connectors for easy installation, easy to follow instructions included.

Coaxial antenna for longer range and perfect for use with gate openers with metal covers.

Replaces the 1099-30 or 1090CX
Includes 9.5" local whip antenna, 3 ft of 75 ohm coaxial cable, connector, mounting hardware

Multicode - Gate or Garage Door Opener Receiver

Multicode 1090 receiver for gate or garage door openers.

300 MHz Frequency. 10 Dip switches for coding. 24 Volts, 3 connecting prongs for easy installation.

Upgrade or replace your old garage door opener receiver.

Universal, installs on any automatic garage door opener. This receiver is perfect for use on access gates as well.

Includes easy to follow schematics and installation instructions.

Compatible remotes: Carper 300, Multicode 3060, Multicode 3070, Multicode 3083, Multicode 3089, Multicode 4120, Multicode 4140, Multicode 4200, and Skylink 100.

Multicode 3028-50 - 2 Channel Gate or Garage Door Opener Receiver

The 3028-50 comes in a plastic housing that is easy to work with.

It will operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate.

Features: Dual frequency - Multi-Code or Stanley compatible; jumper selectable 12-24 Volts AC or DC. Auto voltage sensing - no jumpers to set.

Two relays, their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.

Will hold 512 remotes using the dip switch settings.

Supplied with whip antenna, three feet of coaxial cable and bulkhead connector.

Power: 12 - 30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered.

Frequency: 300 MHz and 310 MHz.
Dimensions: 3.625 x 5.25 x 1.5 inches

Multi Code Stanley 1050 105015 Garage Door Opener remote

Stanley Digital garage door opener remote control transmitter

Compatible with dip-switch system, also the five wire system ALL IN ONE.

works with 310 mhz.

10 Dip Switches

Compatible with all Stanleys from 1982-1995,

Also compatible with the old wire coding system (5 pairs of wires)

Long life lithium batteries included
visor clip included

Multicode 1099-20 110V Gate or Garage Door Opener Receiver Model

110 Volt 300 MHZ Frequency, gate or garage door opener receiver.

2-Wire system with built-in transformer; easy to follow instructions included.

Coaxial antenna for longer range and perfect for use with gate operators with metal covers.

10 Dip Switches, single channel, will operate one device.

One year Multicode manufacturer warranty

Eagle EG314 Keypad, wireless Multi-code (Linear 4200)

Wireless Multi-code keypad

Compatible with 300 MHz Multi-Code transmitters

Multicode 1090-3089 - 300MHz 1 Receiver with 2 Remotes

Upgrade your old garage door opener receiver and transmitter with this Multicode set.

Installs on ANY automatic gate or garage door opener.

This receiver and transmitter set will also install on access gates as well.

Multicode 1090-3089 - 300MHz 1 Receiver with 3 Remotes

Upgrade your old garage door opener receiver and transmitter with this Multicode set.

Installs on ANY automatic gate or garage door opener.

This receiver and transmitter set will also install on access gates as well.

Multicode 4200 with 2 3089 Remotes and a 1099-50 Receiver

MultiCode 300 MHz Frequency.

Gate or Garage Door Opener Key-pad with 2-3089 remotes and a 1099-50 coaxial receiver.

Easy installation, mounts with just 2 screws, instructions included.

Back light keypad for night time visibility.

Linear Multicode 3083 Firefly 300MCD22K Garage Door Opener Keychain Remote

Firefly 300MCD22K garage door opener keychain remote is a 10 dip switch, 300 MHz remote that is compatible with Multicode.

Features & Specifications Compatible with Multi-Code receivers and transmitters

Test/operate LED
Keychain model

Power: Long-life 12 V battery
Frequency: 300 MHz
Dip switches found in battery compartment

Linear Multicode 3060/3070 Compatible Firefly 300MCD21K Garage Door Opener Keychain Remote

Firefly 300MCD21K garage door opener keychain remote is a 10 dip switch, 300 MHz remote that is compatible with Multicode.

Compatible with Multi-Code receivers and transmitters
Test/operate LED
Keychain model
Gray case
Power: Long-life 12 V battery
Frequency: 300 MHz
10 Dip switches found in battery compartment

Multicode 3028-50 and 3022 Combo Kit

Dual frequency - Multi-Code or Stanley compatible; jumper selectable.

12-24 Volts AC or DC, Auto voltage sensing - no jumpers to set.

Two relays, their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.

Will hold 512 remotes using the dip switch settings.

Supplied with whip antenna, three feet of coaxial cable and bulkhead connector.

Power: 12 - 30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered.

Frequency: 300 MHz and 310 MHz.
Dimensions: 3.625 x 5.25 x 1.5 inches

To Top of Page---> MultiCode Garage Door Opener

Back to Garage Door Opener Remote

Go To Home Page---> Garage Door Opener Guide